HP DL 380 vs. FBSD 5.3 beta 3 vs. OBSD 3.6 snapshot vs. NBSD 1.6.2 vs. Sarge

HP DL 380 vs. FBSD 5.3 beta 3 vs. OBSD 3.6 snapshot vs. NBSD 1.6.2 vs. SargeNa akkor nezzuk a HP-t. A masik regi volt? Akkor itt egy uj szerver. HP Proliant ML 380 G4. Semmi extra:

(http://h18004.www1.hp.com/products/servers/proliantdl380/index.html)

- 2 darab Intel Xeon 3.06 GHz processzor

- ServerWorks alaplapon Compaq (HP) Smart Array 5i kontroller

- 2 darab 36.4 GB-on UW 3 SCSI merevlemez RAID 1-ben

- 2 darab Broadcom BCM5703 GE rezes adapter

OpenBSD 3.6:

----------------

Bebootol, de nem latja a Compaq Smart Array kontrollert. Suck. Telepites vege. (thuglife szerint az OpenBSD 3.7-ben mar lesz hozza driver...)

dmesg:

OpenBSD 3.6 (RAMDISK_CD) #362: Fri Aug 27 11:52:20 MDT 2004

deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD

cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.06 GHz

cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID

real mem = 2147041280 (2096720K)

avail mem = 1954152448 (1908352K)

using 4278 buffers containing 107454464 bytes (104936K) of memory

mainbus0 (root)

bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000

pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000

pcibios0: PCI BIOS has 9 Interrupt Routing table entries

pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5 SouthBridge" rev 0x00)

pcibios0: PCI bus #0 is the last bus

bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1800 0xee000/0x2000!

cpu0 at mainbus0

pci0 at mainbus0 bus 0: configuration mode 1 (no bios)

pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE" rev 0x33

pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE" rev 0x00

pci1 at pchb1 bus 3

pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE" rev 0x00

pci2 at pchb2 bus 1

"Compaq Smart Array 5i/532 rev.2" rev 0x01 at pci2 dev 3 function 0 not configured

vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27

wsdisplay0 at vga1: console (80x25, vt100 emulation)

vendor "Compaq", unknown product 0xb203 (class system subclass miscellaneous, rev 0x01) at pci0 dev 4 function 0 not configured

vendor "Compaq", unknown product 0xb204 (class system subclass miscellaneous, rev 0x01) at pci0 dev 4 function 2 not configured

pcib0 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93

pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA

atapiscsi0 at pciide0 channel 0 drive 0

scsibus0 at atapiscsi0: 2 targets

cd0 at scsibus0 targ 0 lun 0: SCSI0 5/cdrom removable

cd0(pciide0:0:0): using PIO mode 4

ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 7, version 1.0, legacy support

ohci0: SMM does not respond, resetting

usb0 at ohci0: USB revision 1.0

uhub0 at usb0

uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub0: 4 ports with 4 removable, self powered

pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00

pchb4 at pci0 dev 16 function 0 "ServerWorks CIOBX2" rev 0x05

pchb5 at pci0 dev 16 function 2 "ServerWorks CIOBX2" rev 0x05

pci3 at pchb5 bus 6

"Compaq PCI Hotplug" rev 0x14 at pci3 dev 30 function 0 not configured

pchb6 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x05

pchb7 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x05

pci4 at pchb7 bus 2

bge0 at pci4 dev 1 function 0 "Broadcom BCM5703X" rev 0x02: irq 11 address 00:11:0a:9b:e8:01

brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2

bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 0x02: couldn't establish interrupt at irq 15

isa0 at pcib0

isadma0 at isa0

pckbc0 at isa0 port 0x60/5

pckbd0 at pckbc0 (kbd slot)

pckbc0: using irq 1 for kbd slot

wskbd0 at pckbd0: console keyboard, using wsdisplay0

npx0 at isa0 port 0xf0/16: using exception 16

pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

fdc0 at isa0 port 0x3f0/6 irq 6 drq 2

fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec

biomask f7ed netmask ffed ttymask ffef

rd0: fixed, 3560 blocks

root on rd0a

rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

fd0: timeout (st0 20 cyl 0)

fd0: timeout (st0 20 cyl 0)

fd0: timeout (st0 20 cyl 0)

fd0c: soft error reading fsbn 0

NetBSD 1.6.2:

----------------

Bebootol, de nem latja a Smart Array 5i kontrollert. Suck. Telepites vege.

dmesg:

Nincs. A boot floppyrol bootolva nincs a floppy-n dmesg.

FreeBSD 5.3 beta 3:

-----------------------

Szepen telepul, felismeri az alkatreszeket. No problem. Management nincs hozza, HP nem szupportalja, ``mezitlabas'' telepites.

dmesg:

Copyright (c) 1992-2004 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

The Regents of the University of California. All rights reserved.

FreeBSD 5.3-BETA3 #0: Sat Sep 4 12:07:48 UTC 2004

root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC

WARNING: WITNESS option enabled, expect reduced performance.

Timecounter "i8254" frequency 1193182 Hz quality 0

CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3056.51-MHz 686-class CPU)

Origin = "GenuineIntel" Id = 0xf29 Stepping = 9

Features=0xbfebfbff

Hyperthreading: 2 logical CPUs

real memory = 2147459072 (2047 MB)

avail memory = 2095996928 (1998 MB)

ACPI APIC Table:

FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs

cpu0 (BSP): APIC ID: 6

cpu1 (AP): APIC ID: 7

MADT: Forcing active-low polarity and level trigger for SCI

ioapic0 irqs 0-15 on motherboard

ioapic1 irqs 16-31 on motherboard

ioapic2 irqs 32-47 on motherboard

ioapic3 irqs 48-63 on motherboard

npx0: [FAST]

npx0: on motherboard

npx0: INT 16 interface

acpi0: on motherboard

acpi0: Power Button (fixed)

Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000

acpi_timer0: port 0x920-0x923 on acpi0

cpu0: on acpi0

cpu1: on acpi0

acpi_tz0: on acpi0

pcib0: on acpi0

pci0: on pcib0

pci0: at device 3.0 (no driver attached)

pci0: at device 4.0 (no driver attached)

pci0: at device 4.2 (no driver attached)

isab0: at device 15.0 on pci0

isa0: on isab0

atapci0: port 0x2000-0x200f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0

ata0: channel #0 on atapci0

ata1: channel #1 on atapci0

ohci0: mem 0xeeef0000-0xeeef0fff irq 7 at device 15.2 on pci0

ohci0: [GIANT-LOCKED]

usb0: OHCI version 1.0, legacy support

usb0: SMM does not respond, resetting

usb0: on ohci0

usb0: USB revision 1.0

uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub0: 4 ports with 4 removable, self powered

pcib1: on acpi0

pci1: on pcib1

ciss0: port 0x3000-0x30ff mem 0xf04f0000-0xf04f3fff,0xf05c0000-0xf05fffff irq 30 at device 3.0 on pci1

ciss0: [GIANT-LOCKED]

pcib2: on acpi0

pci2: on pcib2

bge0: mem 0xf06f0000-0xf06fffff irq 29 at device 1.0 on pci2

miibus0: on bge0

brgphy0: on miibus0

brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto

bge0: Ethernet address: 00:11:0a:9b:e8:01

bge1: mem 0xf06e0000-0xf06effff irq 31 at device 2.0 on pci2

miibus1: on bge1

brgphy1: on miibus1

brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto

bge1: Ethernet address: 00:11:0a:9b:e8:00

pcib3: on acpi0

pci3: on pcib3

pcib4: on acpi0

pci6: on pcib4

pci6: at device 30.0 (no driver attached)

atkbdc0: port 0x64,0x60 irq 1 on acpi0

atkbd0: irq 1 on atkbdc0

kbd0 at atkbd0

atkbd0: [GIANT-LOCKED]

sio0 port 0x3f8-0x3ff irq 4 on acpi0

sio0: type 16550A

fdc0: port 0x3f2-0x3f5 irq 6 drq 2 on acpi0

fdc0: FIFO enabled, 8 bytes threshold

fd0: on fdc0 drive 0

orm0: at iomem 0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0

pmtimer0 on isa0

ppc0: parallel port not found.

sc0: at flags 0x100 on isa0

sc0: VGA

sio1: configured irq 3 not in bitmap of probed irqs 0

sio1: port may not be enabled

vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

Timecounters tick every 10.000 msec

ATAPI_RESET time = 60us

acd0: CDROM at ata0-master PIO4

da0 at ciss0 bus 0 target 0 lun 0

da0: Fixed Direct Access SCSI-0 device

da0: 135.168MB/s transfers

da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)

SMP: AP CPU #1 Launched!

Mounting root from ufs:/dev/da0s1a

ciss0: *** Parity/consistency initialization complete, logical drive 0

Debian Sarge:

-----------------

Piece of cake. Telepites egyszeru, a telepites utan a devfs / initrd / foo bullshit kernelt ertelemszeruen ki kell dobni, helyette sajat kernelt kell forditani. Management nincs hozza, HP nem szupportalja, ``mezitlabas'' telepites.

dmesg:

CPU1: Intel P4/Xeon Extended MCE MSRs (12) available

CPU1: Thermal monitoring enabled

CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09

Total of 2 processors activated (12140.54 BogoMIPS).

ENABLING IO-APIC IRQs

init IO_APIC IRQs

IO-APIC (apicid-pin) 2-0, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15 not connected.

..TIMER: vector=0x31 pin1=2 pin2=-1

Using local APIC timer interrupts.

calibrating APIC timer ...

..... CPU clock speed is 3056.0003 MHz.

..... host bus clock speed is 132.0869 MHz.

checking TSC synchronization across 2 CPUs: passed.

Brought up 2 CPUs

CPU0: online

domain 0: span 03

groups: 01 02

domain 1: span 03

groups: 03

CPU1: online

domain 0: span 03

groups: 02 01

domain 1: span 03

groups: 03

Freeing initrd memory: 4648k freed

NET: Registered protocol family 16

PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=9

PCI: Using configuration type 1

mtrr: v2.0 (20020519)

ACPI: Subsystem revision 20040326

ACPI-1059: *** Info: There are no GPE blocks defined in the FADT

ACPI: Interpreter enabled

ACPI: Using IOAPIC for interrupt routing

ACPI: PCI Root Bridge [PCI0] (00:00)

PCI: Probing PCI hardware (bus 00)

PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1

ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]

ACPI: PCI Root Bridge [PCI1] (00:01)

PCI: Probing PCI hardware (bus 01)

ACPI: PCI Interrupt Routing Table [_SB_.PCI1._PRT]

ACPI: PCI Root Bridge [PCI2] (00:02)

PCI: Probing PCI hardware (bus 02)

ACPI: PCI Interrupt Routing Table [_SB_.PCI2._PRT]

ACPI: PCI Root Bridge [PCI3] (00:03)

PCI: Probing PCI hardware (bus 03)

ACPI: PCI Interrupt Routing Table [_SB_.PCI3._PRT]

ACPI: PCI Root Bridge [PCI4] (00:06)

PCI: Probing PCI hardware (bus 06)

ACPI: PCI Interrupt Routing Table [_SB_.PCI4._PRT]

ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 *7 10 11 15)

ACPI: PCI Interrupt Link [IN16] (IRQs 4 5 7 10 11 15) *3

ACPI: PCI Interrupt Link [IN17] (IRQs 4 *5 7 10 11 15)

ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 10 11 *15)

ACPI: PCI Interrupt Link [IN19] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN20] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN21] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN23] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN29] (IRQs 4 5 7 10 *11 15)

ACPI: PCI Interrupt Link [IN30] (IRQs 4 5 7 *10 11 15)

ACPI: PCI Interrupt Link [IN31] (IRQs 4 5 7 10 11 *15)

ACPI: PCI Interrupt Link [IN32] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN33] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN34] (IRQs 4 5 7 10 11 15) *0, disabled.

Linux Plug and Play Support v0.97 (c) Adam Belay

PnPBIOS: Scanning system for PnP BIOS support...

PnPBIOS: PnP BIOS support was not detected.

00:00:04[A] -> 3-0 -> IRQ 16 level low

00:00:04[B] -> 3-1 -> IRQ 17 level low

ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 11

00:00:0f[A] -> 2-11 -> IRQ 11 level low

00:01:03[A] -> 3-14 -> IRQ 30 level low

00:02:01[A] -> 3-13 -> IRQ 29 level low

00:02:02[A] -> 3-15 -> IRQ 31 level low

00:03:01[A] -> 3-4 -> IRQ 20 level low

00:03:01[B] -> 3-5 -> IRQ 21 level low

00:06:01[A] -> 3-8 -> IRQ 24 level low

00:06:01[B] -> 3-9 -> IRQ 25 level low

00:06:02[A] -> 3-10 -> IRQ 26 level low

00:06:02[B] -> 3-11 -> IRQ 27 level low

00:06:1e[A] -> 3-2 -> IRQ 18 level low

number of MP IRQ sources: 15.

number of IO-APIC #2 registers: 16.

number of IO-APIC #3 registers: 16.

number of IO-APIC #4 registers: 16.

number of IO-APIC #5 registers: 16.

testing the IO APIC.......................

IO APIC #2......

.... register #00: 02000000

....... : physical APIC id: 02

....... : Delivery Type: 0

....... : LTS : 0

.... register #01: 000F0011

....... : max redirection entries: 000F

....... : PRQ implemented: 0

....... : IO APIC version: 0011

.... register #02: 02000000

....... : arbitration: 02

.... IRQ redirection table:

NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

00 000 00 1 0 0 0 0 0 0 00

01 003 03 0 0 0 0 0 1 1 39

02 003 03 0 0 0 0 0 1 1 31

03 003 03 0 0 0 0 0 1 1 41

04 003 03 0 0 0 0 0 1 1 49

05 003 03 0 0 0 0 0 1 1 51

06 003 03 0 0 0 0 0 1 1 59

07 003 03 0 0 0 0 0 1 1 61

08 003 03 0 0 0 0 0 1 1 69

09 003 03 0 1 0 1 0 1 1 71

0a 003 03 0 0 0 0 0 1 1 79

0b 003 03 1 1 0 1 0 1 1 81

0c 003 03 0 0 0 0 0 1 1 89

0d 003 03 0 0 0 0 0 1 1 91

0e 003 03 0 0 0 0 0 1 1 99

0f 003 03 0 0 0 0 0 1 1 A1

IO APIC #3......

.... register #00: 03000000

....... : physical APIC id: 03

....... : Delivery Type: 0

....... : LTS : 0

.... register #01: 000F0011

....... : max redirection entries: 000F

....... : PRQ implemented: 0

....... : IO APIC version: 0011

.... register #02: 03000000

....... : arbitration: 03

.... IRQ redirection table:

NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

00 003 03 1 1 0 1 0 1 1 A9

01 003 03 1 1 0 1 0 1 1 B1

02 003 03 1 1 0 1 0 1 1 42

03 000 00 1 0 0 0 0 0 0 00

04 003 03 1 1 0 1 0 1 1 D1

05 003 03 1 1 0 1 0 1 1 D9

06 000 00 1 0 0 0 0 0 0 00

07 000 00 1 0 0 0 0 0 0 00

08 003 03 1 1 0 1 0 1 1 E1

09 003 03 1 1 0 1 0 1 1 E9

0a 003 03 1 1 0 1 0 1 1 32

0b 003 03 1 1 0 1 0 1 1 3A

0c 000 00 1 0 0 0 0 0 0 00

0d 003 03 1 1 0 1 0 1 1 C1

0e 003 03 1 1 0 1 0 1 1 B9

0f 003 03 1 1 0 1 0 1 1 C9

IO APIC #4......

.... register #00: 04000000

....... : physical APIC id: 04

....... : Delivery Type: 0

....... : LTS : 0

.... register #01: 000F0011

....... : max redirection entries: 000F

....... : PRQ implemented: 0

....... : IO APIC version: 0011

.... register #02: 04000000

....... : arbitration: 04

.... IRQ redirection table:

NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

00 000 00 1 0 0 0 0 0 0 00

01 000 00 1 0 0 0 0 0 0 00

02 000 00 1 0 0 0 0 0 0 00

03 000 00 1 0 0 0 0 0 0 00

04 000 00 1 0 0 0 0 0 0 00

05 000 00 1 0 0 0 0 0 0 00

06 000 00 1 0 0 0 0 0 0 00

07 000 00 1 0 0 0 0 0 0 00

08 000 00 1 0 0 0 0 0 0 00

09 000 00 1 0 0 0 0 0 0 00

0a 000 00 1 0 0 0 0 0 0 00

0b 000 00 1 0 0 0 0 0 0 00

0c 000 00 1 0 0 0 0 0 0 00

0d 000 00 1 0 0 0 0 0 0 00

0e 000 00 1 0 0 0 0 0 0 00

0f 000 00 1 0 0 0 0 0 0 00

IO APIC #5......

.... register #00: 05000000

....... : physical APIC id: 05

....... : Delivery Type: 0

....... : LTS : 0

.... register #01: 000F0011

....... : max redirection entries: 000F

....... : PRQ implemented: 0

....... : IO APIC version: 0011

.... register #02: 05000000

....... : arbitration: 05

.... IRQ redirection table:

NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

00 000 00 1 0 0 0 0 0 0 00

01 000 00 1 0 0 0 0 0 0 00

02 000 00 1 0 0 0 0 0 0 00

03 000 00 1 0 0 0 0 0 0 00

04 000 00 1 0 0 0 0 0 0 00

05 000 00 1 0 0 0 0 0 0 00

06 000 00 1 0 0 0 0 0 0 00

07 000 00 1 0 0 0 0 0 0 00

08 000 00 1 0 0 0 0 0 0 00

09 000 00 1 0 0 0 0 0 0 00

0a 000 00 1 0 0 0 0 0 0 00

0b 000 00 1 0 0 0 0 0 0 00

0c 000 00 1 0 0 0 0 0 0 00

0d 000 00 1 0 0 0 0 0 0 00

0e 000 00 1 0 0 0 0 0 0 00

0f 000 00 1 0 0 0 0 0 0 00

IRQ to pin mappings:

IRQ0 -> 0:2

IRQ1 -> 0:1

IRQ3 -> 0:3

IRQ4 -> 0:4

IRQ5 -> 0:5

IRQ6 -> 0:6

IRQ7 -> 0:7

IRQ8 -> 0:8

IRQ9 -> 0:9

IRQ10 -> 0:10

IRQ11 -> 0:11

IRQ12 -> 0:12

IRQ13 -> 0:13

IRQ14 -> 0:14

IRQ15 -> 0:15

IRQ16 -> 1:0

IRQ17 -> 1:1

IRQ18 -> 1:2

IRQ20 -> 1:4

IRQ21 -> 1:5

IRQ24 -> 1:8

IRQ25 -> 1:9

IRQ26 -> 1:10

IRQ27 -> 1:11

IRQ29 -> 1:13

IRQ30 -> 1:14

IRQ31 -> 1:15

.................................... done.

PCI: Using ACPI for IRQ routing

PCI: Device 00:00 not found by BIOS

PCI: Device 00:01 not found by BIOS

PCI: Device 00:02 not found by BIOS

PCI: Device 00:78 not found by BIOS

PCI: Device 00:7b not found by BIOS

PCI: Device 00:80 not found by BIOS

PCI: Device 00:82 not found by BIOS

PCI: Device 00:88 not found by BIOS

PCI: Device 00:8a not found by BIOS

Starting balanced_irq

highmem bounce pool size: 64 pages

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x0

Initializing Cryptographic API

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled

ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize

serio: i8042 AUX port at 0x60,0x64 irq 12

serio: i8042 KBD port at 0x60,0x64 irq 1

input: AT Translated Set 2 keyboard on isa0060/serio0

NET: Registered protocol family 2

IP: routing cache hash table of 16384 buckets, 128Kbytes

TCP: Hash tables configured (established 524288 bind 65536)

NET: Registered protocol family 8

NET: Registered protocol family 20

ACPI: (supports S0 S4 S5)

RAMDISK: cramfs filesystem found at block 0

RAMDISK: Loading 4648 blocks [1 disk] into ram disk... done.

VFS: Mounted root (cramfs filesystem) readonly.

Freeing unused kernel memory: 168k freed

vesafb: probe of vesafb0 failed with error -6

NET: Registered protocol family 1

SCSI subsystem initialized

Compaq CISS Driver (v 2.6.2)

cciss: Device 0xb178 has been found at bus 1 dev 3 func 0

cciss: using DAC cycles

Using anticipatory io scheduler

blocks= 71122560 block_size= 512

heads= 255, sectors= 32, cylinders= 8716

/dev/cciss/host0/target0: p1 p2

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

Adding 501816k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1

EXT3 FS on cciss/c0d0p1, internal journal

Real Time Clock Driver v1.12

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

hda: ATAPI 24X CD-ROM drive, 128kB Cache

Uniform CD-ROM driver Revision: 3.20

Capability LSM initialized

device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com

scb2_flash: warning - can't reserve rom window, continuing

CFI: Found no SCB2 BIOS Flash device at location zero

scb2_flash: flash probe failed!

tg3.c:v3.3 (April 27, 2004)

eth0: Tigon3 [partno(NA) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:0a:9b:e8:01

eth0: HostTXDS[0] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]

eth1: Tigon3 [partno(NA) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:0a:9b:e8:00

eth1: HostTXDS[0] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]

Linux agpgart interface v0.100 (c) Dave Jones

SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1

SvrWks CSB5: chipset revision 147

SvrWks CSB5: not 100% native mode: will probe irqs later

SvrWks CSB5: port 0x01f0 already claimed by ide0

SvrWks CSB5: simplex device: DMA forced

ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio

usbcore: registered new driver usbfs

usbcore: registered new driver hub

ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)

ohci_hcd: block sizes: ed 64 td 64

ohci_hcd 0000:00:0f.2: ServerWorks OSB4/CSB5 OHCI USB Controller

ohci_hcd 0000:00:0f.2: irq 11, pci mem f8986000

ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 4 ports detected

cpci_hotplug: CompactPCI Hot Plug Core version: 0.2

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8

cpqphp: Hot Plug Subsystem Device ID: a2fe

cpqphp: Initializing the PCI hot plug controller residing on PCI bus 6

PCI: Using BIOS Interrupt Routing Table

PCI: Using BIOS Interrupt Routing Table

tg3: eth0: Link is up at 100 Mbps, full duplex.

tg3: eth0: Flow control is on for TX and on for RX.

inserting floppy driver for 2.6.7-1-686-smp

Floppy drive(s): fd0 is 1.44M

FDC 0 is a National Semiconductor PC87306

Na akkor nezzuk a HP-t. A masik regi volt? Akkor itt egy uj szerver. HP Proliant ML 380 G4. Semmi extra:

(http://h18004.www1.hp.com/products/servers/proliantdl380/index.html)

- 2 darab Intel Xeon 3.06 GHz processzor

- ServerWorks alaplapon Compaq (HP) Smart Array 5i kontroller

- 2 darab 36.4 GB-on UW 3 SCSI merevlemez RAID 1-ben

- 2 darab Broadcom BCM5703 GE rezes adapter

OpenBSD 3.6:

----------------

Bebootol, de nem latja a Compaq Smart Array kontrollert. Suck. Telepites vege. (thuglife szerint az OpenBSD 3.7-ben mar lesz hozza driver...)

dmesg:

OpenBSD 3.6 (RAMDISK_CD) #362: Fri Aug 27 11:52:20 MDT 2004

deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD

cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.06 GHz

cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID

real mem = 2147041280 (2096720K)

avail mem = 1954152448 (1908352K)

using 4278 buffers containing 107454464 bytes (104936K) of memory

mainbus0 (root)

bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000

pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000

pcibios0: PCI BIOS has 9 Interrupt Routing table entries

pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5 SouthBridge" rev 0x00)

pcibios0: PCI bus #0 is the last bus

bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1800 0xee000/0x2000!

cpu0 at mainbus0

pci0 at mainbus0 bus 0: configuration mode 1 (no bios)

pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE" rev 0x33

pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE" rev 0x00

pci1 at pchb1 bus 3

pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE" rev 0x00

pci2 at pchb2 bus 1

"Compaq Smart Array 5i/532 rev.2" rev 0x01 at pci2 dev 3 function 0 not configured

vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27

wsdisplay0 at vga1: console (80x25, vt100 emulation)

vendor "Compaq", unknown product 0xb203 (class system subclass miscellaneous, rev 0x01) at pci0 dev 4 function 0 not configured

vendor "Compaq", unknown product 0xb204 (class system subclass miscellaneous, rev 0x01) at pci0 dev 4 function 2 not configured

pcib0 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93

pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA

atapiscsi0 at pciide0 channel 0 drive 0

scsibus0 at atapiscsi0: 2 targets

cd0 at scsibus0 targ 0 lun 0: SCSI0 5/cdrom removable

cd0(pciide0:0:0): using PIO mode 4

ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 7, version 1.0, legacy support

ohci0: SMM does not respond, resetting

usb0 at ohci0: USB revision 1.0

uhub0 at usb0

uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub0: 4 ports with 4 removable, self powered

pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00

pchb4 at pci0 dev 16 function 0 "ServerWorks CIOBX2" rev 0x05

pchb5 at pci0 dev 16 function 2 "ServerWorks CIOBX2" rev 0x05

pci3 at pchb5 bus 6

"Compaq PCI Hotplug" rev 0x14 at pci3 dev 30 function 0 not configured

pchb6 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x05

pchb7 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x05

pci4 at pchb7 bus 2

bge0 at pci4 dev 1 function 0 "Broadcom BCM5703X" rev 0x02: irq 11 address 00:11:0a:9b:e8:01

brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2

bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 0x02: couldn't establish interrupt at irq 15

isa0 at pcib0

isadma0 at isa0

pckbc0 at isa0 port 0x60/5

pckbd0 at pckbc0 (kbd slot)

pckbc0: using irq 1 for kbd slot

wskbd0 at pckbd0: console keyboard, using wsdisplay0

npx0 at isa0 port 0xf0/16: using exception 16

pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

fdc0 at isa0 port 0x3f0/6 irq 6 drq 2

fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec

biomask f7ed netmask ffed ttymask ffef

rd0: fixed, 3560 blocks

root on rd0a

rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

fd0: timeout (st0 20 cyl 0)

fd0: timeout (st0 20 cyl 0)

fd0: timeout (st0 20 cyl 0)

fd0c: soft error reading fsbn 0

NetBSD 1.6.2:

----------------

Bebootol, de nem latja a Smart Array 5i kontrollert. Suck. Telepites vege.

dmesg:

Nincs. A boot floppyrol bootolva nincs a floppy-n dmesg.

FreeBSD 5.3 beta 3:

-----------------------

Szepen telepul, felismeri az alkatreszeket. No problem. Management nincs hozza, HP nem szupportalja, ``mezitlabas'' telepites.

dmesg:

Copyright (c) 1992-2004 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

The Regents of the University of California. All rights reserved.

FreeBSD 5.3-BETA3 #0: Sat Sep 4 12:07:48 UTC 2004

root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC

WARNING: WITNESS option enabled, expect reduced performance.

Timecounter "i8254" frequency 1193182 Hz quality 0

CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3056.51-MHz 686-class CPU)

Origin = "GenuineIntel" Id = 0xf29 Stepping = 9

Features=0xbfebfbff

Hyperthreading: 2 logical CPUs

real memory = 2147459072 (2047 MB)

avail memory = 2095996928 (1998 MB)

ACPI APIC Table:

FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs

cpu0 (BSP): APIC ID: 6

cpu1 (AP): APIC ID: 7

MADT: Forcing active-low polarity and level trigger for SCI

ioapic0 irqs 0-15 on motherboard

ioapic1 irqs 16-31 on motherboard

ioapic2 irqs 32-47 on motherboard

ioapic3 irqs 48-63 on motherboard

npx0: [FAST]

npx0: on motherboard

npx0: INT 16 interface

acpi0: on motherboard

acpi0: Power Button (fixed)

Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000

acpi_timer0: port 0x920-0x923 on acpi0

cpu0: on acpi0

cpu1: on acpi0

acpi_tz0: on acpi0

pcib0: on acpi0

pci0: on pcib0

pci0: at device 3.0 (no driver attached)

pci0: at device 4.0 (no driver attached)

pci0: at device 4.2 (no driver attached)

isab0: at device 15.0 on pci0

isa0: on isab0

atapci0: port 0x2000-0x200f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0

ata0: channel #0 on atapci0

ata1: channel #1 on atapci0

ohci0: mem 0xeeef0000-0xeeef0fff irq 7 at device 15.2 on pci0

ohci0: [GIANT-LOCKED]

usb0: OHCI version 1.0, legacy support

usb0: SMM does not respond, resetting

usb0: on ohci0

usb0: USB revision 1.0

uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub0: 4 ports with 4 removable, self powered

pcib1: on acpi0

pci1: on pcib1

ciss0: port 0x3000-0x30ff mem 0xf04f0000-0xf04f3fff,0xf05c0000-0xf05fffff irq 30 at device 3.0 on pci1

ciss0: [GIANT-LOCKED]

pcib2: on acpi0

pci2: on pcib2

bge0: mem 0xf06f0000-0xf06fffff irq 29 at device 1.0 on pci2

miibus0: on bge0

brgphy0: on miibus0

brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto

bge0: Ethernet address: 00:11:0a:9b:e8:01

bge1: mem 0xf06e0000-0xf06effff irq 31 at device 2.0 on pci2

miibus1: on bge1

brgphy1: on miibus1

brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto

bge1: Ethernet address: 00:11:0a:9b:e8:00

pcib3: on acpi0

pci3: on pcib3

pcib4: on acpi0

pci6: on pcib4

pci6: at device 30.0 (no driver attached)

atkbdc0: port 0x64,0x60 irq 1 on acpi0

atkbd0: irq 1 on atkbdc0

kbd0 at atkbd0

atkbd0: [GIANT-LOCKED]

sio0 port 0x3f8-0x3ff irq 4 on acpi0

sio0: type 16550A

fdc0: port 0x3f2-0x3f5 irq 6 drq 2 on acpi0

fdc0: FIFO enabled, 8 bytes threshold

fd0: on fdc0 drive 0

orm0: at iomem 0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0

pmtimer0 on isa0

ppc0: parallel port not found.

sc0: at flags 0x100 on isa0

sc0: VGA

sio1: configured irq 3 not in bitmap of probed irqs 0

sio1: port may not be enabled

vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

Timecounters tick every 10.000 msec

ATAPI_RESET time = 60us

acd0: CDROM at ata0-master PIO4

da0 at ciss0 bus 0 target 0 lun 0

da0: Fixed Direct Access SCSI-0 device

da0: 135.168MB/s transfers

da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)

SMP: AP CPU #1 Launched!

Mounting root from ufs:/dev/da0s1a

ciss0: *** Parity/consistency initialization complete, logical drive 0

Debian Sarge:

-----------------

Piece of cake. Telepites egyszeru, a telepites utan a devfs / initrd / foo bullshit kernelt ertelemszeruen ki kell dobni, helyette sajat kernelt kell forditani. Management nincs hozza, HP nem szupportalja, ``mezitlabas'' telepites.

dmesg:

CPU1: Intel P4/Xeon Extended MCE MSRs (12) available

CPU1: Thermal monitoring enabled

CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09

Total of 2 processors activated (12140.54 BogoMIPS).

ENABLING IO-APIC IRQs

init IO_APIC IRQs

IO-APIC (apicid-pin) 2-0, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15 not connected.

..TIMER: vector=0x31 pin1=2 pin2=-1

Using local APIC timer interrupts.

calibrating APIC timer ...

..... CPU clock speed is 3056.0003 MHz.

..... host bus clock speed is 132.0869 MHz.

checking TSC synchronization across 2 CPUs: passed.

Brought up 2 CPUs

CPU0: online

domain 0: span 03

groups: 01 02

domain 1: span 03

groups: 03

CPU1: online

domain 0: span 03

groups: 02 01

domain 1: span 03

groups: 03

Freeing initrd memory: 4648k freed

NET: Registered protocol family 16

PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=9

PCI: Using configuration type 1

mtrr: v2.0 (20020519)

ACPI: Subsystem revision 20040326

ACPI-1059: *** Info: There are no GPE blocks defined in the FADT

ACPI: Interpreter enabled

ACPI: Using IOAPIC for interrupt routing

ACPI: PCI Root Bridge [PCI0] (00:00)

PCI: Probing PCI hardware (bus 00)

PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1

ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]

ACPI: PCI Root Bridge [PCI1] (00:01)

PCI: Probing PCI hardware (bus 01)

ACPI: PCI Interrupt Routing Table [_SB_.PCI1._PRT]

ACPI: PCI Root Bridge [PCI2] (00:02)

PCI: Probing PCI hardware (bus 02)

ACPI: PCI Interrupt Routing Table [_SB_.PCI2._PRT]

ACPI: PCI Root Bridge [PCI3] (00:03)

PCI: Probing PCI hardware (bus 03)

ACPI: PCI Interrupt Routing Table [_SB_.PCI3._PRT]

ACPI: PCI Root Bridge [PCI4] (00:06)

PCI: Probing PCI hardware (bus 06)

ACPI: PCI Interrupt Routing Table [_SB_.PCI4._PRT]

ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 *7 10 11 15)

ACPI: PCI Interrupt Link [IN16] (IRQs 4 5 7 10 11 15) *3

ACPI: PCI Interrupt Link [IN17] (IRQs 4 *5 7 10 11 15)

ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 10 11 *15)

ACPI: PCI Interrupt Link [IN19] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN20] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN21] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN23] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN29] (IRQs 4 5 7 10 *11 15)

ACPI: PCI Interrupt Link [IN30] (IRQs 4 5 7 *10 11 15)

ACPI: PCI Interrupt Link [IN31] (IRQs 4 5 7 10 11 *15)

ACPI: PCI Interrupt Link [IN32] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN33] (IRQs 4 5 7 10 11 15) *0, disabled.

ACPI: PCI Interrupt Link [IN34] (IRQs 4 5 7 10 11 15) *0, disabled.

Linux Plug and Play Support v0.97 (c) Adam Belay

PnPBIOS: Scanning system for PnP BIOS support...

PnPBIOS: PnP BIOS support was not detected.

00:00:04[A] -> 3-0 -> IRQ 16 level low

00:00:04[B] -> 3-1 -> IRQ 17 level low

ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 11

00:00:0f[A] -> 2-11 -> IRQ 11 level low

00:01:03[A] -> 3-14 -> IRQ 30 level low

00:02:01[A] -> 3-13 -> IRQ 29 level low

00:02:02[A] -> 3-15 -> IRQ 31 level low

00:03:01[A] -> 3-4 -> IRQ 20 level low

00:03:01[B] -> 3-5 -> IRQ 21 level low

00:06:01[A] -> 3-8 -> IRQ 24 level low

00:06:01[B] -> 3-9 -> IRQ 25 level low

00:06:02[A] -> 3-10 -> IRQ 26 level low

00:06:02[B] -> 3-11 -> IRQ 27 level low

00:06:1e[A] -> 3-2 -> IRQ 18 level low

number of MP IRQ sources: 15.

number of IO-APIC #2 registers: 16.

number of IO-APIC #3 registers: 16.

number of IO-APIC #4 registers: 16.

number of IO-APIC #5 registers: 16.

testing the IO APIC.......................

IO APIC #2......

.... register #00: 02000000

....... : physical APIC id: 02

....... : Delivery Type: 0

....... : LTS : 0

.... register #01: 000F0011

....... : max redirection entries: 000F

....... : PRQ implemented: 0

....... : IO APIC version: 0011

.... register #02: 02000000

....... : arbitration: 02

.... IRQ redirection table:

NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

00 000 00 1 0 0 0 0 0 0 00

01 003 03 0 0 0 0 0 1 1 39

02 003 03 0 0 0 0 0 1 1 31

03 003 03 0 0 0 0 0 1 1 41

04 003 03 0 0 0 0 0 1 1 49

05 003 03 0 0 0 0 0 1 1 51

06 003 03 0 0 0 0 0 1 1 59

07 003 03 0 0 0 0 0 1 1 61

08 003 03 0 0 0 0 0 1 1 69

09 003 03 0 1 0 1 0 1 1 71

0a 003 03 0 0 0 0 0 1 1 79

0b 003 03 1 1 0 1 0 1 1 81

0c 003 03 0 0 0 0 0 1 1 89

0d 003 03 0 0 0 0 0 1 1 91

0e 003 03 0 0 0 0 0 1 1 99

0f 003 03 0 0 0 0 0 1 1 A1

IO APIC #3......

.... register #00: 03000000

....... : physical APIC id: 03

....... : Delivery Type: 0

....... : LTS : 0

.... register #01: 000F0011

....... : max redirection entries: 000F

....... : PRQ implemented: 0

....... : IO APIC version: 0011

.... register #02: 03000000

....... : arbitration: 03

.... IRQ redirection table:

NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

00 003 03 1 1 0 1 0 1 1 A9

01 003 03 1 1 0 1 0 1 1 B1

02 003 03 1 1 0 1 0 1 1 42

03 000 00 1 0 0 0 0 0 0 00

04 003 03 1 1 0 1 0 1 1 D1

05 003 03 1 1 0 1 0 1 1 D9

06 000 00 1 0 0 0 0 0 0 00

07 000 00 1 0 0 0 0 0 0 00

08 003 03 1 1 0 1 0 1 1 E1

09 003 03 1 1 0 1 0 1 1 E9

0a 003 03 1 1 0 1 0 1 1 32

0b 003 03 1 1 0 1 0 1 1 3A

0c 000 00 1 0 0 0 0 0 0 00

0d 003 03 1 1 0 1 0 1 1 C1

0e 003 03 1 1 0 1 0 1 1 B9

0f 003 03 1 1 0 1 0 1 1 C9

IO APIC #4......

.... register #00: 04000000

....... : physical APIC id: 04

....... : Delivery Type: 0

....... : LTS : 0

.... register #01: 000F0011

....... : max redirection entries: 000F

....... : PRQ implemented: 0

....... : IO APIC version: 0011

.... register #02: 04000000

....... : arbitration: 04

.... IRQ redirection table:

NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

00 000 00 1 0 0 0 0 0 0 00

01 000 00 1 0 0 0 0 0 0 00

02 000 00 1 0 0 0 0 0 0 00

03 000 00 1 0 0 0 0 0 0 00

04 000 00 1 0 0 0 0 0 0 00

05 000 00 1 0 0 0 0 0 0 00

06 000 00 1 0 0 0 0 0 0 00

07 000 00 1 0 0 0 0 0 0 00

08 000 00 1 0 0 0 0 0 0 00

09 000 00 1 0 0 0 0 0 0 00

0a 000 00 1 0 0 0 0 0 0 00

0b 000 00 1 0 0 0 0 0 0 00

0c 000 00 1 0 0 0 0 0 0 00

0d 000 00 1 0 0 0 0 0 0 00

0e 000 00 1 0 0 0 0 0 0 00

0f 000 00 1 0 0 0 0 0 0 00

IO APIC #5......

.... register #00: 05000000

....... : physical APIC id: 05

....... : Delivery Type: 0

....... : LTS : 0

.... register #01: 000F0011

....... : max redirection entries: 000F

....... : PRQ implemented: 0

....... : IO APIC version: 0011

.... register #02: 05000000

....... : arbitration: 05

.... IRQ redirection table:

NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

00 000 00 1 0 0 0 0 0 0 00

01 000 00 1 0 0 0 0 0 0 00

02 000 00 1 0 0 0 0 0 0 00

03 000 00 1 0 0 0 0 0 0 00

04 000 00 1 0 0 0 0 0 0 00

05 000 00 1 0 0 0 0 0 0 00

06 000 00 1 0 0 0 0 0 0 00

07 000 00 1 0 0 0 0 0 0 00

08 000 00 1 0 0 0 0 0 0 00

09 000 00 1 0 0 0 0 0 0 00

0a 000 00 1 0 0 0 0 0 0 00

0b 000 00 1 0 0 0 0 0 0 00

0c 000 00 1 0 0 0 0 0 0 00

0d 000 00 1 0 0 0 0 0 0 00

0e 000 00 1 0 0 0 0 0 0 00

0f 000 00 1 0 0 0 0 0 0 00

IRQ to pin mappings:

IRQ0 -> 0:2

IRQ1 -> 0:1

IRQ3 -> 0:3

IRQ4 -> 0:4

IRQ5 -> 0:5

IRQ6 -> 0:6

IRQ7 -> 0:7

IRQ8 -> 0:8

IRQ9 -> 0:9

IRQ10 -> 0:10

IRQ11 -> 0:11

IRQ12 -> 0:12

IRQ13 -> 0:13

IRQ14 -> 0:14

IRQ15 -> 0:15

IRQ16 -> 1:0

IRQ17 -> 1:1

IRQ18 -> 1:2

IRQ20 -> 1:4

IRQ21 -> 1:5

IRQ24 -> 1:8

IRQ25 -> 1:9

IRQ26 -> 1:10

IRQ27 -> 1:11

IRQ29 -> 1:13

IRQ30 -> 1:14

IRQ31 -> 1:15

.................................... done.

PCI: Using ACPI for IRQ routing

PCI: Device 00:00 not found by BIOS

PCI: Device 00:01 not found by BIOS

PCI: Device 00:02 not found by BIOS

PCI: Device 00:78 not found by BIOS

PCI: Device 00:7b not found by BIOS

PCI: Device 00:80 not found by BIOS

PCI: Device 00:82 not found by BIOS

PCI: Device 00:88 not found by BIOS

PCI: Device 00:8a not found by BIOS

Starting balanced_irq

highmem bounce pool size: 64 pages

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x0

Initializing Cryptographic API

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled

ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize

serio: i8042 AUX port at 0x60,0x64 irq 12

serio: i8042 KBD port at 0x60,0x64 irq 1

input: AT Translated Set 2 keyboard on isa0060/serio0

NET: Registered protocol family 2

IP: routing cache hash table of 16384 buckets, 128Kbytes

TCP: Hash tables configured (established 524288 bind 65536)

NET: Registered protocol family 8

NET: Registered protocol family 20

ACPI: (supports S0 S4 S5)

RAMDISK: cramfs filesystem found at block 0

RAMDISK: Loading 4648 blocks [1 disk] into ram disk... done.

VFS: Mounted root (cramfs filesystem) readonly.

Freeing unused kernel memory: 168k freed

vesafb: probe of vesafb0 failed with error -6

NET: Registered protocol family 1

SCSI subsystem initialized

Compaq CISS Driver (v 2.6.2)

cciss: Device 0xb178 has been found at bus 1 dev 3 func 0

cciss: using DAC cycles

Using anticipatory io scheduler

blocks= 71122560 block_size= 512

heads= 255, sectors= 32, cylinders= 8716

/dev/cciss/host0/target0: p1 p2

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

Adding 501816k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1

EXT3 FS on cciss/c0d0p1, internal journal

Real Time Clock Driver v1.12

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

hda: ATAPI 24X CD-ROM drive, 128kB Cache

Uniform CD-ROM driver Revision: 3.20

Capability LSM initialized

device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com

scb2_flash: warning - can't reserve rom window, continuing

CFI: Found no SCB2 BIOS Flash device at location zero

scb2_flash: flash probe failed!

tg3.c:v3.3 (April 27, 2004)

eth0: Tigon3 [partno(NA) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:0a:9b:e8:01

eth0: HostTXDS[0] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]

eth1: Tigon3 [partno(NA) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:0a:9b:e8:00

eth1: HostTXDS[0] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]

Linux agpgart interface v0.100 (c) Dave Jones

SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1

SvrWks CSB5: chipset revision 147

SvrWks CSB5: not 100% native mode: will probe irqs later

SvrWks CSB5: port 0x01f0 already claimed by ide0

SvrWks CSB5: simplex device: DMA forced

ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio

usbcore: registered new driver usbfs

usbcore: registered new driver hub

ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)

ohci_hcd: block sizes: ed 64 td 64

ohci_hcd 0000:00:0f.2: ServerWorks OSB4/CSB5 OHCI USB Controller

ohci_hcd 0000:00:0f.2: irq 11, pci mem f8986000

ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 4 ports detected

cpci_hotplug: CompactPCI Hot Plug Core version: 0.2

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8

cpqphp: Hot Plug Subsystem Device ID: a2fe

cpqphp: Initializing the PCI hot plug controller residing on PCI bus 6

PCI: Using BIOS Interrupt Routing Table

PCI: Using BIOS Interrupt Routing Table

tg3: eth0: Link is up at 100 Mbps, full duplex.

tg3: eth0: Flow control is on for TX and on for RX.

inserting floppy driver for 2.6.7-1-686-smp

Floppy drive(s): fd0 is 1.44M

FDC 0 is a National Semiconductor PC87306