OpenBSD 3.6 (RAMDISK_CD) #362: Fri Aug 27 11:52:20 MDT 2004
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 400 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 3220795392 (3145308K)
avail mem = 2932428800 (2863700K)
using 4278 buffers containing 161140736 bytes (157364K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 07/16/99, BIOS32 rev. 0 @ 0xfd261
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 16 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:00:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc8800/0x8000 0xd0800/0x2800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pcib0 at pci0 dev 0 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 0 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SANYO, CD-ROM CRD-1332P, 1.03> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 0 function 2 "Intel 82371AB USB" rev 0x01pci_intr_map: no mapping for pin D
: couldn't map interrupt
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 0 function 3 not configured
ppb0 at pci0 dev 1 function 0 "IBM 82351 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
vendor "IBM", unknown product 0xdc (class bridge subclass miscellaneous, rev 0x02) at pci1 dev 2 function 0 not configured
ahc1 at pci1 dev 4 function 0 "Adaptec AIC-7895" rev 0x04: irq 9
scsibus1 at ahc1: 16 targets
ahc2 at pci1 dev 4 function 1 "Adaptec AIC-7895" rev 0x04: irq 10
scsibus2 at ahc2: 16 targets
vga1 at pci0 dev 10 function 0 "S3 Trio64V2/DX" rev 0x16
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pchb0 at pci0 dev 16 function 0 "Intel 82451NX Mem & IO" rev 0x03
pchb1 at pci0 dev 18 function 0 "Intel 82454NX PXB" rev 0x02
pchb2 at pci0 dev 19 function 0 "Intel 82454NX PXB" rev 0x02
pci2 at pchb2 bus 4
le1 at pci2 dev 6 function 0 "AMD 79c970 PCnet-PCI" rev 0x26: irq 11
le1: address 00:00:e8:79:0a:9e
le1: 8 receive buffers, 2 transmit buffers
le2 at pci2 dev 8 function 0 "AMD 79c970 PCnet-PCI" rev 0x26: irq 5
le2: address 00:00:e8:79:0a:53
le2: 8 receive buffers, 2 transmit buffers

pchb3 at pci0 dev 20 function 0 "Intel 82454NX PXB" rev 0x02
pci3 at pchb3 bus 10
"IBM ServeRAID" rev 0x0d at pci3 dev 1 function 0 not configured
isp0 at pci3 dev 4 function 0 "QLogic ISP2200" rev 0x05: irq 10
scsibus3 at isp0: 256 targets
sd0 at scsibus3 targ 0 lun 0: <IBM, 3542, 0401> SCSI3 0/direct fixed
sd0: 209900MB, 104950 cyl, 64 head, 64 sec, 512 bytes/sec, 429875712 sec total

isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f7c5 netmask ffe5 ttymask ffe7
rd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02