HP DL 380 vs. FBSD 5.3 beta 3 vs. OBSD 3.6 snapshot vs. NBSD 1.6.2 vs. SargeNa akkor nezzuk a HP-t. A masik regi volt? Akkor itt egy uj szerver. HP Proliant ML 380 G4. Semmi extra:
(http://h18004.www1.hp.com/products/servers/proliantdl380/index.html)
- 2 darab Intel Xeon 3.06 GHz processzor
- ServerWorks alaplapon Compaq (HP) Smart Array 5i kontroller
- 2 darab 36.4 GB-on UW 3 SCSI merevlemez RAID 1-ben
- 2 darab Broadcom BCM5703 GE rezes adapter
OpenBSD 3.6:
----------------
Bebootol, de nem latja a Compaq Smart Array kontrollert. Suck. Telepites vege. (thuglife szerint az OpenBSD 3.7-ben mar lesz hozza driver...)
dmesg:
OpenBSD 3.6 (RAMDISK_CD) #362: Fri Aug 27 11:52:20 MDT 2004
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.06 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 2147041280 (2096720K)
avail mem = 1954152448 (1908352K)
using 4278 buffers containing 107454464 bytes (104936K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5 SouthBridge" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1800 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE" rev 0x00
pci1 at pchb1 bus 3
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE" rev 0x00
pci2 at pchb2 bus 1
"Compaq Smart Array 5i/532 rev.2" rev 0x01 at pci2 dev 3 function 0 not configured
vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
vendor "Compaq", unknown product 0xb203 (class system subclass miscellaneous, rev 0x01) at pci0 dev 4 function 0 not configured
vendor "Compaq", unknown product 0xb204 (class system subclass miscellaneous, rev 0x01) at pci0 dev 4 function 2 not configured
pcib0 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 7, version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00
pchb4 at pci0 dev 16 function 0 "ServerWorks CIOBX2" rev 0x05
pchb5 at pci0 dev 16 function 2 "ServerWorks CIOBX2" rev 0x05
pci3 at pchb5 bus 6
"Compaq PCI Hotplug" rev 0x14 at pci3 dev 30 function 0 not configured
pchb6 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x05
pchb7 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x05
pci4 at pchb7 bus 2
bge0 at pci4 dev 1 function 0 "Broadcom BCM5703X" rev 0x02: irq 11 address 00:11:0a:9b:e8:01
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 0x02: couldn't establish interrupt at irq 15
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f7ed netmask ffed ttymask ffef
rd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
fd0: timeout (st0 20 cyl 0)
fd0: timeout (st0 20 cyl 0)
fd0: timeout (st0 20 cyl 0)
fd0c: soft error reading fsbn 0
NetBSD 1.6.2:
----------------
Bebootol, de nem latja a Smart Array 5i kontrollert. Suck. Telepites vege.
dmesg:
Nincs. A boot floppyrol bootolva nincs a floppy-n dmesg.
FreeBSD 5.3 beta 3:
-----------------------
Szepen telepul, felismeri az alkatreszeket. No problem. Management nincs hozza, HP nem szupportalja, ``mezitlabas'' telepites.
dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA3 #0: Sat Sep 4 12:07:48 UTC 2004
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3056.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff
Hyperthreading: 2 logical CPUs
real memory = 2147459072 (2047 MB)
avail memory = 2095996928 (1998 MB)
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 6
cpu1 (AP): APIC ID: 7
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 irqs 0-15 on motherboard
ioapic1 irqs 16-31 on motherboard
ioapic2 irqs 32-47 on motherboard
ioapic3 irqs 48-63 on motherboard
npx0: [FAST]
npx0: on motherboard
npx0: INT 16 interface
acpi0: on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: port 0x920-0x923 on acpi0
cpu0: on acpi0
cpu1: on acpi0
acpi_tz0: on acpi0
pcib0: on acpi0
pci0: on pcib0
pci0: at device 3.0 (no driver attached)
pci0: at device 4.0 (no driver attached)
pci0: at device 4.2 (no driver attached)
isab0: at device 15.0 on pci0
isa0: on isab0
atapci0: port 0x2000-0x200f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ohci0: mem 0xeeef0000-0xeeef0fff irq 7 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: on acpi0
pci1: on pcib1
ciss0: port 0x3000-0x30ff mem 0xf04f0000-0xf04f3fff,0xf05c0000-0xf05fffff irq 30 at device 3.0 on pci1
ciss0: [GIANT-LOCKED]
pcib2: on acpi0
pci2: on pcib2
bge0: mem 0xf06f0000-0xf06fffff irq 29 at device 1.0 on pci2
miibus0: on bge0
brgphy0: on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:11:0a:9b:e8:01
bge1: mem 0xf06e0000-0xf06effff irq 31 at device 2.0 on pci2
miibus1: on bge1
brgphy1: on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: Ethernet address: 00:11:0a:9b:e8:00
pcib3: on acpi0
pci3: on pcib3
pcib4: on acpi0
pci6: on pcib4
pci6: at device 30.0 (no driver attached)
atkbdc0: port 0x64,0x60 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: on fdc0 drive 0
orm0: at iomem 0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: at flags 0x100 on isa0
sc0: VGA
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ATAPI_RESET time = 60us
acd0: CDROM at ata0-master PIO4
da0 at ciss0 bus 0 target 0 lun 0
da0: Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
ciss0: *** Parity/consistency initialization complete, logical drive 0
Debian Sarge:
-----------------
Piece of cake. Telepites egyszeru, a telepites utan a devfs / initrd / foo bullshit kernelt ertelemszeruen ki kell dobni, helyette sajat kernelt kell forditani. Management nincs hozza, HP nem szupportalja, ``mezitlabas'' telepites.
dmesg:
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
Total of 2 processors activated (12140.54 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3056.0003 MHz.
..... host bus clock speed is 132.0869 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
CPU0: online
domain 0: span 03
groups: 01 02
domain 1: span 03
groups: 03
CPU1: online
domain 0: span 03
groups: 02 01
domain 1: span 03
groups: 03
Freeing initrd memory: 4648k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=9
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI-1059: *** Info: There are no GPE blocks defined in the FADT
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI1] (00:01)
PCI: Probing PCI hardware (bus 01)
ACPI: PCI Interrupt Routing Table [_SB_.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (00:02)
PCI: Probing PCI hardware (bus 02)
ACPI: PCI Interrupt Routing Table [_SB_.PCI2._PRT]
ACPI: PCI Root Bridge [PCI3] (00:03)
PCI: Probing PCI hardware (bus 03)
ACPI: PCI Interrupt Routing Table [_SB_.PCI3._PRT]
ACPI: PCI Root Bridge [PCI4] (00:06)
PCI: Probing PCI hardware (bus 06)
ACPI: PCI Interrupt Routing Table [_SB_.PCI4._PRT]
ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 *7 10 11 15)
ACPI: PCI Interrupt Link [IN16] (IRQs 4 5 7 10 11 15) *3
ACPI: PCI Interrupt Link [IN17] (IRQs 4 *5 7 10 11 15)
ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 10 11 *15)
ACPI: PCI Interrupt Link [IN19] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN20] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN21] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN23] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN29] (IRQs 4 5 7 10 *11 15)
ACPI: PCI Interrupt Link [IN30] (IRQs 4 5 7 *10 11 15)
ACPI: PCI Interrupt Link [IN31] (IRQs 4 5 7 10 11 *15)
ACPI: PCI Interrupt Link [IN32] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN33] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN34] (IRQs 4 5 7 10 11 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: PnP BIOS support was not detected.
00:00:04[A] -> 3-0 -> IRQ 16 level low
00:00:04[B] -> 3-1 -> IRQ 17 level low
ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 11
00:00:0f[A] -> 2-11 -> IRQ 11 level low
00:01:03[A] -> 3-14 -> IRQ 30 level low
00:02:01[A] -> 3-13 -> IRQ 29 level low
00:02:02[A] -> 3-15 -> IRQ 31 level low
00:03:01[A] -> 3-4 -> IRQ 20 level low
00:03:01[B] -> 3-5 -> IRQ 21 level low
00:06:01[A] -> 3-8 -> IRQ 24 level low
00:06:01[B] -> 3-9 -> IRQ 25 level low
00:06:02[A] -> 3-10 -> IRQ 26 level low
00:06:02[B] -> 3-11 -> IRQ 27 level low
00:06:1e[A] -> 3-2 -> IRQ 18 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 16.
number of IO-APIC #3 registers: 16.
number of IO-APIC #4 registers: 16.
number of IO-APIC #5 registers: 16.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 1 0 1 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 1 1 0 1 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 03000000
....... : arbitration: 03
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 A9
01 003 03 1 1 0 1 0 1 1 B1
02 003 03 1 1 0 1 0 1 1 42
03 000 00 1 0 0 0 0 0 0 00
04 003 03 1 1 0 1 0 1 1 D1
05 003 03 1 1 0 1 0 1 1 D9
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 003 03 1 1 0 1 0 1 1 E1
09 003 03 1 1 0 1 0 1 1 E9
0a 003 03 1 1 0 1 0 1 1 32
0b 003 03 1 1 0 1 0 1 1 3A
0c 000 00 1 0 0 0 0 0 0 00
0d 003 03 1 1 0 1 0 1 1 C1
0e 003 03 1 1 0 1 0 1 1 B9
0f 003 03 1 1 0 1 0 1 1 C9
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IO APIC #5......
.... register #00: 05000000
....... : physical APIC id: 05
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 05000000
....... : arbitration: 05
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 1:0
IRQ17 -> 1:1
IRQ18 -> 1:2
IRQ20 -> 1:4
IRQ21 -> 1:5
IRQ24 -> 1:8
IRQ25 -> 1:9
IRQ26 -> 1:10
IRQ27 -> 1:11
IRQ29 -> 1:13
IRQ30 -> 1:14
IRQ31 -> 1:15
.................................... done.
PCI: Using ACPI for IRQ routing
PCI: Device 00:00 not found by BIOS
PCI: Device 00:01 not found by BIOS
PCI: Device 00:02 not found by BIOS
PCI: Device 00:78 not found by BIOS
PCI: Device 00:7b not found by BIOS
PCI: Device 00:80 not found by BIOS
PCI: Device 00:82 not found by BIOS
PCI: Device 00:88 not found by BIOS
PCI: Device 00:8a not found by BIOS
Starting balanced_irq
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4648 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 168k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
Compaq CISS Driver (v 2.6.2)
cciss: Device 0xb178 has been found at bus 1 dev 3 func 0
cciss: using DAC cycles
Using anticipatory io scheduler
blocks= 71122560 block_size= 512
heads= 255, sectors= 32, cylinders= 8716
/dev/cciss/host0/target0: p1 p2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 501816k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1
EXT3 FS on cciss/c0d0p1, internal journal
Real Time Clock Driver v1.12
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
scb2_flash: warning - can't reserve rom window, continuing
CFI: Found no SCB2 BIOS Flash device at location zero
scb2_flash: flash probe failed!
tg3.c:v3.3 (April 27, 2004)
eth0: Tigon3 [partno(NA) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:0a:9b:e8:01
eth0: HostTXDS[0] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
eth1: Tigon3 [partno(NA) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:0a:9b:e8:00
eth1: HostTXDS[0] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
Linux agpgart interface v0.100 (c) Dave Jones
SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
SvrWks CSB5: port 0x01f0 already claimed by ide0
SvrWks CSB5: simplex device: DMA forced
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:0f.2: ServerWorks OSB4/CSB5 OHCI USB Controller
ohci_hcd 0000:00:0f.2: irq 11, pci mem f8986000
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
cpqphp: Hot Plug Subsystem Device ID: a2fe
cpqphp: Initializing the PCI hot plug controller residing on PCI bus 6
PCI: Using BIOS Interrupt Routing Table
PCI: Using BIOS Interrupt Routing Table
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
inserting floppy driver for 2.6.7-1-686-smp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306